//USB EXP 1U

[1U Alt Mounting Panel]

MANUFACTURER:

DUSTY CLOUDS

MATERIAL: FR-4

FORMAT: 1U

HP: 14

PLAN:

BUY:

USB EXP 1U is an alternative double mounting panel specifically designed for the Instruō Arbhar & Lúbadh USB Expanders. These expanders are each 3U 2HP thus taking too much space for just two USB ports. 

**Attention** In order to use the Dusty Clouds // USB EXP 1U you need to buy one or both of the Instruō USB expanders. 

USB EXP 1U without components
USB EXP 1U with components

*Installation tips* In order install the USB ports you just have to unscrew the two screws that hold the PCB on the Instruō USB Expander, then place the PCB on the back of the alt panel, align it and screw it in place using the same screws. That’s it! Keep in mind that if your 1U row is far from the modules you may need to invest on a longer USB cable than the one that comes from Instruō.

 

**Before you buy** This is not an official Instruō product. You are fully responsible for any damage you cause to your modules, other gear or your self while handling, installing or using the parts that I offer. The panels  are made of FR-4 so there will be minor imperfections on the silk screen, or the solder mask, the holes, the cuts etc.. In fact, it’s really rare for a PCB panel not to have imperfections. This has to do with the manufacturing process and the materials that are used.